Re: How do you tell if you have standard size bearings??

Posted by Larry on January 06, 2002 at 19:00:26 from (216.202.132.34):

In Reply to: How do you tell if you have standard size bearings?? posted by Steven@nd on January 06, 2002 at 15:34:20:

Carp is right..have your crank mic'd (you can use mic or plastigauge)..that will tell you condition of crank and whether it needs to be turned or not. If you have it turned the shop will tell you what oversize bearings you need..will be marked like .001, .002 etc.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: How do you tell if you have standard size bearings?? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]