Farmall & IHC Tractors Discussion Board |
300U power steering, hey Steven
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by big fred on January 17, 2002 at 08:59:07 from (12.13.226.18):
For some reason I'm unable to respond to your post below. Here's what I was trying to say: You need a power steering gearbox out of a 300U, 350U or (so I've heard) a 460U. You will also need the safety/regulator/flow control valve from that same tractor, as the P/S safety/regulator/flow control valve includes a priority valve that isn't in the non-P/S unit. It provides priority flow to the P/S unit, which I would think is an important safety feature. Add a couple hoses, one that goes from the back of the safety/regulator/flow control valve to the P/S gearbox valve body and the other from the valve body to the reservoir, generally directly under the fast-hitch cylinder forward mounting location. To get at the steering gearbox you gotta remove the instrument panel and gas tank, and the only tough part is getting the throttle control unhooked 'cause some goofball didn't want to use a cotter pin and stuck a nail in there and bent it over real good. Good luck, and when you get your power steering gearbox, make sure you know what tractor it came off so you can get parts in the future. Good luck.
Follow Ups:
Home
| Forums
Today's Featured Article -
Women and Tractors - More Views From the Farmer's Wife - by Teri Burkholder. The top ten reasons why the judges wouldn't let you participate in the stock antique tractor pull: Hey, this is stock! It came with that V8 in it! That "R" on my tires stands for "really old" not radial! Blue gas? We thought it was a pretty color! What wire hooked to my throttle?
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|