Farmall Tractors Discussion Board |
Re: 6 to 12 volt conversion for 54 H
[ View Follow Ups ] [ Post Followup ] [ Return to Farmall Tractors Discussion Board ]
Posted by Sandy on April 11, 1999 at 19:07:10:
In Reply to: 6 to 12 volt conversion for 54 H posted by bernard on April 10, 1999 at 19:29:45:
I read with great interest your desire to convert 6 to 12 volt. I did that on the Super C that I take to tractor shows. I wanted a tractor that I could depend upon to start consistantly, however I wanted to retain the original look as much as possible. I accomplished this and am extremely pleased! I wrote specific details and directions in an article for Red Power magazine Sept - Oct 1997. The old Farmalls use the same basic electric system and this conversion can be used on all of them, A, B, C, H & M. All parts can be purchased from a CaseIH dealer. If you can not find the parts you need locally you can get them from Fergus International in Fergus Falls Minnesota. fergint@prairietech.net The only mistake in the article is that you must at the end of the installation touch the battery tab to the gen tab on the regulator with a wire. I now have a tractor that starts every time consistantly. Feel free to contact me with questions.
Follow Ups:
Post a Followup
|