Re: Exhaust pipe removal. How difficult?

Posted by sflem849 on February 22, 2007 at 10:46:16 from (66.254.196.139):

In Reply to: Exhaust pipe removal. How difficult? posted by Mike CA on February 22, 2007 at 09:04:36:

I have good luck with getting it red hot and then hitting it with good penetrating oil (ie PB Blaster, Fluid Film, MM Oil, JB 80) Something about the rapid heat change and the differences in cooling will draw the oil in. Just a tip.
I have a feeling your threads will be so rotted that you will have problems running good new threads. I had to thread/weld mine in. I wasnt real worried bc the manifold had a hairline crack in it and I had to have that zapped too.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]