Re: Are front weights needed on M ?

Posted by sflem849 on March 01, 2007 at 17:51:29 from (68.115.31.5):

In Reply to: Are front weights needed on M ? posted by Randy as in Randy-IA on March 01, 2007 at 13:54:32:

Not to get on subject ;) but I have a SMTA that I pull and I made my own weight racks for it. I took H beam cutoffs from the local steel yard and cut them on the band saw (It takes a BIG bandsaw) at 8.25" if I remember correctly. That is sized perfect for Magnum or older IH weights (dont know about newer, will fit our agriking weights too) After I cut them I drilled holes to match the holes in the frame and milled an IH symbol in the end. (That is optional) Bolt them on and weight her up!
One tip that I could give you is to not get too long an H beam. The weights will walk out to the ends if you dont secure them and it will twist the beam.
Also, no precip in SE Wisconsin just REALLY windy.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]