Re: H front end lube question?

Posted by Janicholson on March 04, 2007 at 16:03:51 from (66.216.226.55):

In Reply to: Re: H front end lube question? posted by lekander883 on March 04, 2007 at 14:39:50:

That is only a support bearing it has grease in it from a zerk fitting, no oil fill. If there is a device that looks about 3-1/2" in dia. and 7" long or so, it may be a power steering torque motor. If it is there, and has hydraulic lines going to it, it is a PS unit. If it is there and has no lines going to it it may be an abandoned PS unit that would really add to the slop in the steering, and be hard to turn. In this case if you still are unsure, post a picture. JimN

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]