Re: Farmall M bolster question

Posted by Tom Bateson on March 07, 2007 at 19:36:36 from (64.31.81.17):

In Reply to: Farmall M bolster question posted by John S-B on March 06, 2007 at 18:50:03:

Currently restoring a 1945M and also replaced both bushings for the upper bolster asssembly. My shaft was also worn down about 0.020 causing play in the shaft assembly. I had a local machine shop spray weld both bushing areas on the shaft which took care of the play. Spray welding process cost about $50.00 for the two bushing areas. Now I just need to get a good set of top sector gears to finish removing all the play from the steering.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]