Re: 350 u will not move

Posted by georgeky on March 20, 2007 at 21:10:22 from (64.12.116.71):

In Reply to: 350 u will not move posted by Trent DeRudder on March 20, 2007 at 20:47:44:

I am not sure, but the TA has nothing to do with it in the forward position that is direct drive. It very well could be the clutch. Have you noticed it slipping with a load prior to this. The tractor needs to split between engine and bell housing to replace clutch. It may also be a adjustment problem between clutch and TA. You need to get a IT manual it will have all these procedures in it including the proper engine clutch to TA clutch adjustments. The more I think about it it may need adjustment. I bought a 450 while back that would not move and I adjusted the cluth linkages and got it to work. Regardless you need that book they have to be exactly right by the book. The book ia available at TSC or IH and maybe on this site look to the left at the top of page and click on tractor manuals.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]