Re: Help Identifying Rod/Wrist Pin Bushing

Posted by CSR on March 21, 2007 at 03:04:01 from (192.249.47.8):

In Reply to: Help Identifying Rod/Wrist Pin Bushing posted by CSR on March 20, 2007 at 07:03:16:

My Rods are p/n 30926 DB. The bushing p/n I took out is an active number and is was used before the changover which occured about s/n 103xxx. The bushing in the TISCO kit only works above that s/n. They contacted Federal Mogul and Clevite and could not come up with any for me. I contacted Hoobers Case/IH in PA and they have access to a set they are sending me.
I'll let the machine shop put them in a ream them for each wrist pin.
thanks for all the advice.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]