Re: Now what do I do? Super C

Posted by El Toro on March 28, 2007 at 09:22:44 from (64.12.116.71):

In Reply to: Now what do I do? Super C posted by cole on March 28, 2007 at 08:27:06:

You need to make sure the wire connections on the new points are not touching the distributor case.
Run a piece of 320 wet or dry thru the new points,
then take a cotton swab dipped in alcohol and clean the points. Then pull the coil wire from the cap and hold within 1/8-1/4" of a good ground
while someone cranks over the engine with the starter. Be sure the ignition switch is in the on position.

If there's good fire here from the coil wire reconnect the wire to the cap and see if the engine will start. Hal

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]