Re: International 656 Hydro

Posted by Larry in Mo on April 21, 2007 at 10:14:51 from (75.105.155.251):

In Reply to: International 656 Hydro posted by Crashagn on April 21, 2007 at 09:20:02:

I used to have a IH 815 combine w/Hydro drive. Engine operating speed was 2800 rpm. same engine in 806 tractor ran at 2400. Gallons pumped and operating pressure are what makes a hydrostatic drive work properly, therefore under load they should be operated at their full capacity, but as always, good judgement should be used. Also, if changing ground speed, use the hydro instead of the throttle. Larry in Mo.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]