Rebuilding a IH cylinder

Posted by Randy as in Randy-IA on April 26, 2007 at 20:10:18 from (207.177.83.110):

Hi All , I picked up a 3-1/2" cylinder at auction and when I drained the old oil out it had some crud in it . I'd like to take it apart and see what it looks like inside and maybe put new seals in . I don't think it's worth putting much money into it because the shaft is a little rusty with some very small pits . The cylinder cost me 10 bucks so I wouldn't mind getting some use out of it . I don't want to hook it up till I know it's clean inside . Anybody ever done this that could give me some insight on how it comes apart and what the torque would be on the long outside bolts when I put it back together ? Thanks ! ...Randy

Replies:

• Re: Rebuilding a IH cylinder JayWalt 05:06:05 04/27/07 (0)
• Re: Rebuilding a IH cylinder J.J. from Afton 20:35:24 04/26/07 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]