Re: M Governor

Posted by Rootsy on April 30, 2007 at 09:43:08 from (24.176.33.123):

In Reply to: M Governor posted by Josh V.L. on April 30, 2007 at 09:18:53:

are you saying that when you start the tractor it instantly races or after you work the throttle it will not return to idle? have you removed the carburetor recently?

could be that the governor to carb shaft is not in the dog in the throttle shaft of the carb. the carb is free to do as it wishes and will generally go WOT. Or if the governor shaft is binding it will go up in rpm as you work throttle but generally not go back to idle fully.

the easiest way to check for binding of the governor shaft is to loosen the 2 screws on each end (governor and carb) and see if that helps. always tighten the 2 screws at the governor last.

If this is not the case... gonna have to go inside the governor and take a looksee. A couple of things it might be in there...

Replies:

• Re: M Governor Josh V.L. 09:52:53 04/30/07 (1)
  • Re: M Governor BF8690 11:11:01 04/30/07 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]