Farmall & IHC Tractors Discussion Board |
Re: 674 brakes
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by georgeky on May 01, 2007 at 09:00:43 from (205.188.116.138):
In Reply to: 674 brakes posted by marvin yenglin on May 01, 2007 at 06:45:02:
The brakes are hydrostatic, so that means they draw oil from the tractor resivoir, which is the rear end. On the back of the tractor above rear axle there is a bleeder on each side. You can slip a small hose over the bleeder and place the other end of it in the filler spout on the back of tractor, then hold the pedals down and open the bleeder and let tractor run and it will bleed itself. If you will use a clear hose you can see when you have air free oil running through it. These tractors tend to need O rings evey few years in the brake system. I recommend you find someone who really knows these to work on it, as most folks forget some of the O rings when putting new ones in. I also urge you to get an IT manual for your tractor as it will explain all this better than I can, and other things too. They can be ordersd here as well as other online sites, or can be picked up at TSC or other farm stores. IH 51 I think is the manual you need.
Replies:
Home
| Forums
Today's Featured Article -
Trenching With a Plow - by Staff. Introduction: This interesting information came from one of the discussion forums here at YT. We thought we should place it up front so it could be read by anyone interested in putting old iron to work. [Editor] I tried something new today, and it worked so well I thought I should post it - in case it might help someone else. I'm running 100 yards of 4" drain pipe from the gutter downspouts of our house to a pond down the hill. This should hel
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|