Re: Head Gasket Replacement on Super A

Posted by CNKS on May 10, 2007 at 19:09:31 from (204.249.178.32):

In Reply to: Head Gasket Replacement on Super A posted by Hartford in Beeton on May 10, 2007 at 17:53:57:

www.caseih.com indicates that it is not a C113 or C123 gasket, it is for a C135, such as the 340, which has a water pump. The stroke of the C135 is 4 1/16 inches, yours is 4, thus yours is about a 133 cid. Both yours and the C135 have a 4.25 bore. Your engine has been bored, if it did not overheat, then it is probably ok, although the non-water pump tractors have bigger passages, I believe. Jim are others may have other ideas, as I don't know what happens to the cooling when you bore a thermosiphon block and have to use a different gasket.

Replies:

• Re: Head Gasket Replacement on Super A Hartford in Beeton 19:46:07 05/10/07 (1)
  • Re: Head Gasket Replacement on Super A CNKS 18:30:52 05/11/07 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]