Re: Farmall 756 with German 310 ( few Questions)

Posted by nw_bearcat on May 15, 2007 at 08:49:07 from (164.144.240.25):

In Reply to: Re: Farmall 756 with German 310 ( few Questions) posted by chadd on May 15, 2007 at 05:50:21:

The tractor's older than me, i'm the 2nd owner, 6900 hours w/ a engine OH, clutch, and TA somewhere in there ~3500 hrs. you can see light through the rad all over, the fins are clean and straight. the belt is tight, and we've replaced the thermostat just to see if that would help, no difference. I've never had it dyno'ed, but given it was supposedly an older gent that had it before, I'm doubting he had it screwed down too hard. I wouldn't mind, but if it heats as it is, any more would just be foolish.

I don't have a "real" gauge on it, but figure when it boils over, we need to slow down a bit. May put one on this summer and find out the real truth, and if i get motivated enough, might pull the rad and have it boiled, or put a different one on.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]