Re: 1953 Super C

Posted by El Toro on May 20, 2007 at 06:21:57 from (205.188.116.138):

In Reply to: 1953 Super C posted by Boyd Christensen on May 20, 2007 at 05:24:49:

That engine has wet sleeves and you can probably
get the sleeves and pistons out after soaking with ATF. I would not pull start the tractor you can do serious damage to the drive train. I would pull the engine. It's easier to work on and you may need to find a good block. I used a piece of 2X2 oak and a hammer to tap on the rods on a Farmall A after soaking in ATF. Some of the pistons came out with the sleeves. I reused the old rods and installed a new overbore sleeve kit.
You need to be patient and don't too agressive with the hammer. Hal

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]