Re: Question about pulling engine on my H

Posted by Owen Aaland on May 22, 2007 at 15:17:25 from (65.165.246.166):

In Reply to: Re: Question about pulling engine on my H posted by neblinc on May 22, 2007 at 05:52:12:

If the dowels are not what is keeping the engine from moving more, the other thing that can be causing the problem is the clutch shaft seized in the pilot bearing and/or clutch disk. If that is the cause you may have to disconnect the driveshaft joint and release carrier bracket and take the shaft out with the engine. Once out of the clutch housing you will be able to separate the clutch from the flywheel to get at the pilot bearing.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]