Re: cam gear super m

Posted by Hayfarmer on June 03, 2007 at 09:22:10 from (66.243.239.215):

In Reply to: cam gear super m posted by point3dave on June 03, 2007 at 05:34:46:

Not too bad a job if you have access to a loader or something to lift the front end. I had to change the camshaft on my smta a while back. The gear loostened up and put it out of time. I blocked up the motor and used my tractor loader to pull the steering bolster, radiator assembly out. You have to losten frame bolts. It is a little harder to put back together and definitely works better with 2 people. While you have the front end off check or replace belts. Another problem is getting crankshaft pulley off. When you get it together you have to time the gears. Oh, and before you put the front cover back on don't forget that little tin oil flinger on the crank shaft.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]