Re: ih 350 utility clutch adj (again)long

Posted by the tractor vet on June 04, 2007 at 21:18:46 from (75.19.120.54):

In Reply to: Re: ih 350 utility clutch adj (again)long posted by lester 350 u on June 04, 2007 at 20:53:16:

I understand what ya ment but ya have to start with the main clutch and get it working and the throw out bearing not touchen the finger then ya have to get the linkage for the T/A set so here again the bearing is not toughing but still makes it disengauge . The boook was written for NEW tractor settings not old wore out settings , as i am sure that ya have excess ware on the clutch pedal and all the clevis have ware along with the headed pins and there is ware where the rod for the throw out bearing goes thru the bell housing. SOooooo this throws all the factory setting plum out the winder.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]