Re: Farmall H -No oil getting to the top end?

Posted by Andy Motteberg on June 07, 2007 at 14:07:21 from (4.143.220.163):

In Reply to: Farmall H -No oil getting to the top end? posted by dej(jed) on June 07, 2007 at 07:12:31:

Does the oil gauge work? You should use compressed air and clean out any lines and clean the oil filter canister out good and put in a new filter. Drain the oil pan and remove it and wipe out any sludge. On the bottom of the oil pump pick up, there is a screen. Remove the metal piece that holds the screen in and clean it out good. Also be sure that the crankcase breather in the push rod chamber on the side of the engine is clean. Put the screen back in the pump and put in a new oil pan gasket. See if this gets you any oil pressure. Make sure all oil lines are good and un damaged.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]