Re: 2400A (454) clutch

Posted by Janicholson on June 19, 2007 at 20:40:16 from (66.173.50.31):

In Reply to: Re: 2400A (454) clutch posted by rret on June 19, 2007 at 02:49:15:

Four items for your project.
1} (I assume a wide front end) Place metal blocks between the front cast frame and the front axle on both sides to prevent tipping the tractor over. They should be constructed so they will not come out.
2} Use splitting stands, So the rear of the engine is supported well.
3} Photo everything before and during the process, and use white cloth tape to label each wire and connection for reassembly.
4} everything is heavier than it looks by 75 pounds.
Thanks for taking the news well. JimN

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]