Farmall Tractors Discussion Board |
Re: Re: Re: 806 PTO will not engage
[ View Follow Ups ] [ Post Followup ] [ Return to Farmall Tractors Discussion Board ]
Posted by mark on May 20, 1999 at 20:11:11 from (152.163.207.74):
In Reply to: Re: Re: 806 PTO will not engage posted by Check on May 20, 1999 at 13:58:55:
put a preasure gauge in the port on the left side of the pto at hi idle it must read at least 240 psi if their is none it is probley the small pin in the controle valve .
Follow Ups:
Post a Followup
|