Re: cub hydraulics

Posted by David Sr. on February 07, 2002 at 09:48:48 from (216.34.188.35):

In Reply to: cub hydraulics posted by Tony on February 07, 2002 at 07:57:05:

Just a note:

If you find that you need to replace the o-rings in the unit, good luck. 95% of them can be gotten in a rebuild kit, but there's one in the kit that we bought that didn't fit right and was damaged when we assembled the unit, so it leaked.

We have been everywhere, and that particular o-ring, the one on the control shaft, is hard to find. Everything that comes close is either too big and won't fit in, or too skinny and leaks.

Be careful with the strainer if you disassemble the unit too.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: cub hydraulics Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]