Re: How Much Gear Oil in M Transmission

Posted by Farmer Bob on February 10, 2002 at 13:26:54 from (66.152.73.169):

In Reply to: How Much Gear Oil in M Transmission posted by John on February 10, 2002 at 11:34:15:

Save about a qt. of the 13 Gal. of lube to put into the belt pulley housing. There is a filler plug on the top of the housing. This is if you loosened the side seal retainer behind the mounting disc for the actual belt pulley. This is a natural place for condensation to build up. Just loosen the four bolts and pull the seal retainer outward to drain the pulley housing. After its drained, push the plate in and tighten and then add the qt. of lube. Any extra will drain down into the tranny so you can't overfill it.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: How Much Gear Oil in M Transmission Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]