Farmall & IHC Tractors Discussion Board |
Re: 706 3pt Won't Lower
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Jim on February 11, 2002 at 07:51:02 from (198.247.178.216):
In Reply to: 706 3pt Won't Lower posted by Don on February 11, 2002 at 06:19:12:
What you need to check is the arm that goes to the load control shaft. To check this take off the 3rd link cover and look on the right side of the case. There is an arm that comes up from the bottomof the case along side of the PTO. And there is an other spring loaded arm that comes down from the top. Check to see if the top arm is to the back of the lower arm. The spring loaded arm slips past the other arm and the 3pt will not go down. To get the arm back. I take a rope and go around the top arm and get someone to help you pry the lower arm over and pull the upper arm by . If you have any questions email me
Follow Ups:
Home
| Forums
Today's Featured Article -
Listening to Your Tractor - by Curtis Von Fange. Years ago there was a TV show about a talking car. Unless you are from another planet, physically or otherwise, I don’t think our internal combustion buddies will talk and tell us their problems. But, on the other hand, there is a secret language that our mechanical companions readily do speak. It is an interesting form of communication that involves all the senses of the listener. In this series we are going to investigate and learn the basic rudimentary skills of understanding this lingo.
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|