Re: Re: M Fenders

Posted by lcbateman on February 13, 2002 at 12:13:39 from (206.71.120.1):

In Reply to: Re: M Fenders posted by Dave_Id on February 13, 2002 at 11:47:31:

Thanks Dave. By the way, those part numbers this morning were PPG. The PPG guy says:
1.) Clean the bare casting with DX330
2.) Apply Etch
3.) Scotch Brite after 30 min
4.) Apply K36/K201 Primer/Sealer coats
5.) If sitting for weeks, light sand & 1 more coat or Primer/Sealer before color and clearcoat

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Re: M Fenders Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]