Re: Ottawa backhoe on W-6 Farmall

Posted by Albert on February 25, 2002 at 15:16:07 from (205.188.193.156):

In Reply to: Ottawa backhoe on W-6 Farmall posted by Ron Panek on November 16, 2000 at 05:48:50:

I have an Ottawa Backhoe EX TD5 487 and I repack the cylinders myself. Previously I used the oldstyle horsehair packing. I now use a 1/4 inch by 1/4 inch packing that I think is coated with graphite. When I replace the pakcing I slide the nut up the cylinder and use a small cork screw type tool to remove the old packing. Then I fit the new packing around the cylinder and slice it at a 45 degree angle in the direction so the nut will slide overtop the last portion of the slice to not loosen it. I use two pieces with the slice one on each side of the cylinder. Sometimes it is a little hard to getthe nut started, but I tap lightly with a hammer to get the nut started.

I was also looking for information on the Ottawa Backhoe company, if you ever received any could you please contact me. I need a valve bank rebuild kit. Or if you know who the valve bank manufacturer was I would appreciated it if you could supply that information. Thank you. GrataNaNa365@aol.com

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Ottawa backhoe on W-6 Farmall Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]