Re: H Hydraulic return add on

Posted by PaulH on March 05, 2002 at 15:46:29 from (151.142.252.11):

In Reply to: H Hydraulic return add on posted by rhudson on March 05, 2002 at 13:52:44:

I'd suggest piping the return line to the drain plug on the belly pump. My experience with an M is that if you go into a Tee in the fill pipe, you will have trouble with oil bubbling out the top of the fill pipe through the vent. Somebody on this board had used the bottom return; I'm going to change mine over when I get time. I know there's a shut-off in the vent, but then it builds up pressure in the reservoir, and blows oil out the shaft seal.

Follow Ups:

• Re: Re: H Hydraulic return add on John Blanc 05:10:30 03/06/02 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: H Hydraulic return add on Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]