Farmall & IHC Tractors Discussion Board |
I-544 Motor Problems, Banging sound
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Don on March 25, 2002 at 07:15:44 from (64.105.216.218):
I am in the process of trying to get my Grandfathers I-544 gas tractor started. I finially got it to run for about 1 minute then it stalled and would not restart. I am having a mechanical banging sound in my #1 cylinder. With the spark plug out the sound is not present and I am getting air out of the spark plug hole. When I insert the plug, I hear what sounds like two pieces of metel hitting each other once every cycle. I cut the tip off of a old plug and inserted it, and still got the sound. From this I am assuming that the spark plug is not hitting. All I can figure is that under compression one of my valves (I think exaust) has a week spring and it is getting slammed up into its seat. I would think if the valve was broken it would be hitting all the time, not just when under compression. Has anyone had this problem, or is my logic faulty? Before I tear my engin appart looking for this problem I thought I would ask. It isn't supposed to make this sound when it is running is it? When the tractor would stall, it would spit fuel out the carb (air tube off). I was thinking that if the exaust valve was not staying open (pressure would build under the exuast stroke), when the intake opened, the pressure would push the fuel out the carb instead of drawing it in. Also if this is indeed the problem, how hard it it to fix a spring with the head bolted to the engin. Sorry for the long post. Wanted to list all the details. Any help would be greatly apprechated. Also thank for all the help everyone has already giving me on this tractor in other post.
Follow Ups:
Home
| Forums
Today's Featured Article -
Tractor Profile: Earthmaster - by Staff. This tractor, manufactured by the Earthmaster Farm Equipment company in Burbank, California was made for only two years. The Model C came out in 1948 and was followed by the "CN" (narrow-width model), "CNH (narrow-width high-crop model), "CH" (high-crop), "D" and the "DH" (high-crop) in 1949. The main difference between the models was tire size, tractor width and cultivating height. The "D" series were about 20 inches wider overall than the
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|