Re: How many chisel shanks will M pull?

Posted by boog on March 26, 2002 at 20:54:21 from (66.73.129.192):

In Reply to: How many chisel shanks will M pull? posted by R Wyler on March 26, 2002 at 17:14:18:

Better think again. Back in the 50's we had a 1 shank subsoiler which would run about 18" deep. Pulled it with a '54 SM, 1st gear sometimes 2nd. Had to chain an M on front to hold it down in heavy soils.

Back in the earl '90's I bought a 3 shank Blujet subsoiler and put it behind a 7120 Magnum. Tractor turned 187 hp from factory, and it was all it could handle and then some.

Another problem is shallow tile. Run to deep and I guarantee you WILL find it.

Spoken from experience
boog

Follow Ups:

• Re: Re: How many chisel shanks will M pull? R Wyler 05:09:17 03/27/02 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: How many chisel shanks will M pull? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]