Re: Re: Different types of TA's

Posted by Red Rider on March 28, 2002 at 19:58:34 from (67.226.57.30):

In Reply to: Re: Different types of TA's posted by Chris on March 28, 2002 at 19:23:34:

If you have an operators manuel and have read it then you know that IH did not say anything about limiting the use of the TA low side. If you have replaced your TA throw out bearing or had one in your hands then you would know that this bearing is just that a bearing. It is a sealed roller bearing and like anyother bearing is designed to rotate a lot. I have Three IH tractors with the mecanical TA. I use them a lot and if work load require the use of the TA all day long that what I use. I have 300 Farmall, a 400 Farmall Diesel and a 300 International Utility. I have rebuilt the TA on the 300U and the 400 Diesel with the HD sprague overrun clutch set up. The ramp and roller overrun clutchs were shot but the throw out bearing were still like new. I replaced them any way being as I had the tractor split. I don't know all the incorrect TA use information comes from. I had over 15,000 hours on the 1956 400D with the original TA until last year.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Re: Different types of TA's Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]