Re: B transmission

Posted by big fred on March 29, 2002 at 13:08:56 from (12.13.226.13):

In Reply to: B transmission posted by Will on March 29, 2002 at 10:33:09:

Will, are you saying the shift lever won't physically move into the proper place or that when you move the shift lever, the gears don't engage? In either case, you will probably need to remove the transmission cover to check things out. With the cover off, you should be able to see where your interference is coming from if the levers won't physically move. You would also be able to see the condition of the shifter forks, and if you have an I&T manual, you can check to make sure the forks are properly installed. You should also check the detent balls and springs, to make sure the detent spring cavity hasn't packed full of rust and gunk preventing the balls from moving.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: B transmission Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]