Re: Re: 300u Hydraulics

Posted by big fred on April 10, 2002 at 20:12:10 from (65.219.138.40):

In Reply to: Re: 300u Hydraulics posted by cd on April 10, 2002 at 18:29:23:

On the 300U the regulator and safety valve is the innermost of the 2 valve blocks at the right rear of the reservoir. If you have replaced the screen, you probably know where it is. If you have an exploded view, you can see how to disassemble it. Take it apart and make sure none of the springs are trashed, take out the little orifice screen and clean it, and while it's out make sure you get the crud out of the cavity that screen fits into. My screen was pretty clean, but the cavity it fits into was full of crud. I would agree with cd that your safety or regulator valve is not working properly. One of those springs is readily available, possibly both of them, at your Case/IH parts dealer.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Re: 300u Hydraulics Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]