Re: 5488 hyd. lever detent not working

Posted by Pete1468 on April 13, 2002 at 06:49:06 from (205.188.200.29):

In Reply to: 5488 hyd. lever detent not working posted by red reaper on April 12, 2002 at 20:42:29:

Same basic principal, for less detent, loosen the spring. It is possible that there is a broken spring in there. They're not that hard to work on but you need a 12 point metric socket for the small bolts on the bottom of it. Possibly a 6mm if I remember right.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: 5488 hyd. lever detent not working Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]