Farmall & IHC Tractors Discussion Board |
Re: Super C length and width
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Trailerman (TX) on April 17, 2002 at 06:58:41 from (12.43.224.162):
In Reply to: Super C length and width posted by Jerry on April 16, 2002 at 18:56:19:
Jerry, I am trying to remember the exact measurements, but cannot. I just hauled mine about 100 miles north. I moved the rear tires in about 8"(outside axle measurement). This allowed me to fit it on a gooseneck trailer that is 87 1/2" inside diameter. I was practically rubbing on one side or the other. I plan to move them in about 2 or 3 more inches before I haul it this weekend. The overall length is right at 10'. If you need anymore information or measurements, let me know what your looking for, and I can be more exact.
Follow Ups:
Home
| Forums
Today's Featured Article -
Trenching With a Plow - by Staff. Introduction: This interesting information came from one of the discussion forums here at YT. We thought we should place it up front so it could be read by anyone interested in putting old iron to work. [Editor] I tried something new today, and it worked so well I thought I should post it - in case it might help someone else. I'm running 100 yards of 4" drain pipe from the gutter downspouts of our house to a pond down the hill. This should hel
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|