Re: Re: Re: Re: Setting Valves on a Farmall M

Posted by Dan Kelley on April 19, 2002 at 10:13:15 from (216.229.35.179):

In Reply to: Re: Re: Re: Setting Valves on a Farmall M posted by The Red on April 19, 2002 at 09:59:17:

That's scary. No gap? that generally leads to burned valves, doesn't it? Well, I feel better that I'm thinking about them anyway.

OK, let me see if I have this straight. Find #1 TDC by watching the #1 rockers and then setting the crank notch on the timing mark. Set the #1 valves to 0.018". Turn the crank 180 degrees forward and set #3 valves. Turn the crank and set #4 valves. Turn the crank and set #2 valves. Is that right?

Follow Ups:

• Re: Re: Re: Re: Re: Setting Valves on a Farmall M The Red 10:52:21 04/19/02 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: Re: Re: Re: Setting Valves on a Farmall M Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]