|
Farmall & IHC Tractors Discussion Board |
Hydraulic Pump
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Joe Ice on April 22, 2002 at 20:24:58 from (66.118.195.100):
We have a gear in a hydraulic pump that was made by M&W Gear Co. We have searched around La Junta, Rocky Ford and Durango and Bayfield, Colorado and have been told the company has gone out of business and we have had no luck. The number on the pump is 3 HCS-29R, GL-PX, 1S A81V. The G could be a C, we are not sure. The pump sits behind the timing gear on the front of the motor on an Model M International Tractor and is part of the distributor set-up. There seems to be 2 pumps........one to operate the front end loader and one to operate the power steering unit. There is a 3-way hydraulic set-up on the tractor as well. The broken gear is in the part that has the numbers written on the outside. There are two gears in that box. We are not even sure if a person can buy just the gear and are assuming we will have to buy the whole pump. Please let us know as soon as possible. Thanks. Joe Ice
Follow Ups:
Home
| Forums
Today's Featured Article -
Pitfalls of Tractor Engine Rebuilds - by Chris Pratt. The first pop after you have put the machine together with your own hands is exciting and pleasing. The whole experience can be marred if one moves too fast and makes too many assumptions that they can just use "as is" some parts they should be closely scrutinizing and possibly attended to. In such cases, rework makes what could have been a fun project turn into an irritant or even a nightmare. Minor Irritants To give you an example of an minor but irritating proble
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
