Re: How to put Live Hyd. on a M

Posted by Craig MO on April 23, 2002 at 18:30:25 from (216.139.97.95):

In Reply to: How to put Live Hyd. on a M posted by Tom W on April 23, 2002 at 17:12:21:

On the M's I've done I had to change the timing cover and back plate so the hyd. pump would mount up. The super M's had the right bolt pattern. You will need a relief valve in the system. I used the old belly pump resivor. Using new pump,lines,relief valve and used timing gear cover and plate the cost usually runs around $1000 for the parts. I personaly would not put a used hydraulic pump on especilly an aluminum one.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: How to put Live Hyd. on a M Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]