|
Farmall & IHC Tractors Discussion Board |
Re: Re: Gifts for the day - original Liftall cylinder!
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Denny Frisk on April 27, 2002 at 16:28:51 from (216.165.151.105):
In Reply to: Re: Gifts for the day - original Liftall cylinder! posted by John in Maryland on April 27, 2002 at 15:54:44:
According to the old Liftall service book I have there were a couple different cyl. avail. Most popular were the cultivator cyl, one-way of course, about 1-1/4 to 1-1/2" bore and 12" stroke and the rod extended out the end of the cyl. about 8-10 inches. Same cyl. would work on sickle mowers & other light equip. Odd but Dad's 2M-E corn picker used only 1 to raise & lower the snoots in front. Mounted under the belly of the tractor. Also avail were 2 or 2-1/2" and 3" cyl.
Follow Ups:
Home
| Forums
Today's Featured Article -
Oil Bath Air Filters - by Chris Pratt. Some of us grew up thinking that an air filter was a paper thing that allowed air to pass while trapping dirt particles of a particles of a certain size. What a surprise to open up your first old tractor's air filter case and find a can that appears to be filled with the scrap metal swept from around a machine shop metal lathe. To top that off, you have a cup with oil in it ("why would you want to lubricate your carburetor?"). On closer examination (and some reading in a AC D-14 service manual), I found out that this is a pretty ingenious method of cleaning the air in the tractor's intake tract.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
