Re: timing f-12 magneto

Posted by Dave on April 28, 2002 at 15:39:19 from (216.42.122.45):

In Reply to: timing f-12 magneto posted by blarson on April 28, 2002 at 14:12:01:

I know on a F-20 there is a hole about 1 1/4" dia. in front of clutch housing,hiding behind the frame rail.You look in hole with a flashlite while someone turns engine over slowly.Flywheel should be stamped DC,that should line up with a pointer.Helps to take the sparkplugs out.Hold your thumb over #1 hole to feel for compression,then you know when you're close.Look around on front of your clutch housing for a hole.Might have to hold a rag over a stick against surface of flywheel to clean off crud so stamping can be read.Worked for me.Having someone to help is a big plus.Good luck!

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: timing f-12 magneto Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]