Thanks for the hydraulic help

Posted by K.B. on April 29, 2002 at 11:48:40 from (209.163.14.59):

Just wanted to thank everyone who replied to my post last week about the 240's hydraulics. Here's what I did- tore the regulator valve back down, deburred the valve and pistons, put it all back together, and I had hydraulics. They were working, but still pulling down the engine a little bit. So as I'm looking around, I notice that 42 years worth of dirt and grease is gumming the linkages for the right and rear control valves toghether, causing the rear valve to actuate at the same time as the right valve, putting extra load on the system. Sometimes it's the little things that hold you up, but now the 240 is ready to go.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Thanks for the hydraulic help Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]