Re: Re: Help on loosening exhaust manifold bolts!

Posted by Don Cress on May 02, 2002 at 10:30:57 from (24.166.244.148):

In Reply to: Re: Help on loosening exhaust manifold bolts! posted by Steven@nd on May 02, 2002 at 06:29:47:

FARMALL DON has the right idea....if the bolt does snap off,continue on until you have removed the manifold from the tractor.....now,the ones that snaped off leaving even a small stud sticking out of the head, can be removed....I put a larger nut over broken bolt....weld this nut to the stud... you will melt the stud to the nut... "cook it good ,fill the nut full" ,try to remove it before it is completly cool....I don't recommend the brass nuts....Good luck let me know if this works,I have done this many times.....

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Re: Help on loosening exhaust manifold bolts! Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]