Farmall & IHC Tractors Discussion Board |
Thanks for the Cub info
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Super 55 on May 07, 2002 at 21:09:19 from (207.102.215.37):
(Weird, I thought I posted this this morning, but it wasn't there when I looked later. Somehow I put it on the Talers board) Thanks for all the imput on the Cub I was looking atj. It's a basket case, but you know, you see the poor thing all neglected and you want to take it home and nuture it back to life. I'll wait until I find one that's running at the least. If anyone is interested in the tractor, it's in Langley, BC just above the US border. The fellow is asking $800 Canadian,that's about $520 US. It is stuck, missing the side valve cover, grill, and the front tires are shot. It has a lot of surface rust and the guy who owns it has the head off. The block is pitted around the #4 cylinder from water getting in. The rear tires are good, it has wheel weights front and back and lights. Email me if you want the owners number or email. --------------------------------------------------------------- ---------
Follow Ups:
Home
| Forums
Today's Featured Article -
Talk of the Town: How to Remove a Broken Bolt - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I have an aluminum steering gear housing with a bolt broken off in it. The bolt is about a 3/8" x 1 1/2" bolt. I've already drilled the center of the bolt out with about 7/64" drill bit the entire length of the bolt. Only one end of the bolt is visible. I tried to use an easy out but it wasn't budging and I didn't want t
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|