Re: stripped threads on Cub

Posted by Dave C. on May 16, 2002 at 11:20:15 from (153.91.1.194):

In Reply to: stripped threads on Cub posted by baman on May 15, 2002 at 06:38:37:

Heli coil is the way to go with the final drives. But if you have it done, let a machine shop do it. they can mount the drive housing so that it doesn't move when they drill it and that way they get a straight hole. don't try to do it on the tractor. you can't hand feed the bit to the steel the way a drill press can.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: stripped threads on Cub Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]