Re: F-20 Flywheel removal

Posted by adam on May 16, 2002 at 16:10:03 from (65.214.64.122):

In Reply to: F-20 Flywheel removal posted by Jim on May 16, 2002 at 10:40:19:

Ive done that three times, and it never gets any easier. First, pull the pin out using a hardened 3/8 bolt and a couple of bigger nuts under it. after that and the nut are out of the way, then the hard part starts. apparently, i h shops had a tool to use. you don't pull the flywheel off, you push it off using the 3 larger 1/2 inch or so holes arount the outsidde. find something really hard, i thinh head studs work and put it in the hole. cut it off so that you can get a bolt threaded in the hole and with the stud under it push agins the back of the motor.you will not be able to see what your doing, but trust yourself. you have to do all three holes this way at the same time and keep the flywheel straigt while comming off. use lots of heat and an impact wrench. this is hard and confusing, but i hope you'll get the idea. adam

Follow Ups:

• Re: Re: F-20 Flywheel removal jon Brown 19:27:00 09/08/04 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: F-20 Flywheel removal Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]