Farmall & IHC Tractors Discussion Board |
Cub vs 100 Mower Swap??
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by D. Caleb Murphy on May 20, 2002 at 22:06:31 from (209.39.34.189):
OK Here goes- I've got a cub with a woods 42. I also have a 100 - Not running yet (only pd $200 for it last year with 3pt mower, disk, and plows). IF & WHEN it's running, can I swap the belly mower to it? I know the PTO on the cub turns reverse of normal, but can I just put a twist in the belt to make it function? I've got some thick bahia grass that I don't always get cut in time and it sure loads up the cub trying to cut it. Takes at least 2 passes most times. The extra oomph from the 100 would be most welcome if my idea will work. Thanks for any info..... dcm
Follow Ups:
Home
| Forums
Today's Featured Article -
Talk of the Town: How to Remove a Broken Bolt - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I have an aluminum steering gear housing with a bolt broken off in it. The bolt is about a 3/8" x 1 1/2" bolt. I've already drilled the center of the bolt out with about 7/64" drill bit the entire length of the bolt. Only one end of the bolt is visible. I tried to use an easy out but it wasn't budging and I didn't want t
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|