bull/pinion grease seal

Posted by obie NH on May 25, 2002 at 10:51:32 from (152.163.204.83):

I was replaceing the brakes on my 39 H,and as you could suspect the grease seals on both sides were leaking badly.I ordered some aftermarket seals and while waiting for them started to remove the old ones.Every seal I ever dealt with on cars or big trucks go directly into the steel casting.So as I was destroying these seals to remove them I notice not was I only destroying the seal but also a piece around them which is call the seal ring.Will this ring come out of the casting?is this a part which you can get from IH ?Or does the new seal go in without the seal ring?Hope I did not make a whole lot of extra work by not doing this the correct way.Thanks Obie in NH

Follow Ups:

• Re: bull/pinion grease seal Mike ISW 15:07:58 05/25/02 (0)
• Re: bull/pinion grease seal justin 11:10:08 05/25/02 (0)

Post A Followup Name: E-Mail: Subject: Re: bull/pinion grease seal Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]