706 Running Again, but?

Posted by Farmall Don on May 25, 2002 at 18:15:03 from (64.83.160.22):

After replace of the #6 melted piston and a complete valve job, I have the tractor running again. After driving it a half mile or so I stopped & noticed that it has a little bit of white smoke coming out of the breather. Is this normal for a break-in period or could I have another problem? I honed out the sleeve and put in a new piston & rings. The machine runs great.

It has 500 hours on the complete overhaul and the sleeves had .002 to .003 wear and the other pistons rings measured good.

Follow Ups:

• Re: 706 Running Again, but? Ken T. 05:16:27 05/26/02 (1)
  • Re: Re: 706 Running Again, but? Farmall Don 11:01:04 05/26/02 (0)

Post A Followup Name: E-Mail: Subject: Re: 706 Running Again, but? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]