Re: 560 farmall rear axle

Posted by RPM on June 03, 2002 at 06:38:25 from (63.110.182.225):

In Reply to: 560 farmall rear axle posted by lray on June 03, 2002 at 05:38:17:

You will have to take the wheel off to remove outer cap, then you can replace the seal, also examine the outer bearing for failing, if this is not where noise is coming from I would check the inner axle bearing, not as easy to do but can be done without taking the deck off. Take the pto unit out, (drain Hytran) work thru hole and remove bull gear cap screw, push the axle out by using both sides bull gear bolts and a heavy sleeve, then remove axle housing, then reverse procedure to reassemble. Noise could be loose wheel clamps, dont overlook this. I worked in IH dealer for 40 years from 1960, this was common on heavy use 560.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: 560 farmall rear axle Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]